MTP-12 UPC to Unterminated Fiber Pigtail, Female, 12 Fibers, OM4
Factory terminated MTP® Elite Female pigtail with 12 Fibers on OM4 50/125μm fiber. The unjacketed ribbon end is prepared for mass fusion splicing, turning a full connector installation into a single splice operation.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to Unterminated, 12 Fibers
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥27dB
- Unjacketed
- Minimum bend radius 7.5mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 12OM4-MTPU-1M-F |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | Unterminated |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | UPC |
| Fiber Count | 12 Fibers |
| Cable Jacket | Unjacketed |
| Cable Structure | Bare Ribbon Fiber |
| Glass Fiber | Bend Insensitive Fiber |
| Min. Bend Radius | 7.5mm |
| Connector Durability | 500 times |
| Tensile Strength | 80/240N (Long/Short Term) |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥27dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -60 to 85°C (-76 to 185℉) |
| Storage Temperature | -60 to 85°C (-76 to 185℉) |
Applications
This pigtail is intended for fusion splice installation in enclosures and panels. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. The color coded ribbon makes strand identification fast during splicing and testing.
Ribbon and Splice Details
The bare ribbon end is color coded to the standard 12-fiber sequence, which makes mass fusion splicing quick and unambiguous. Each ribbon is stripped and prepared in the factory for consistent splice results in the field.
Ordering Information
To order, quote 12OM4-MTPU-1M-F together with the length and quantity you need. The 1m (3ft) version is the standard model; Private labeling, custom packaging and project specific documentation are all handled in-house.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
Logistics
We dispatch worldwide by international courier, with air and sea freight options for bulk orders. Goods can be sent collect on your courier account, and documentation for customs clearance is provided with every shipment.
Built to Your Spec
As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.
