100G CFP2 LR4 4x 25G NRZ 1310nm 10km LC Duplex Module, Cisco
Designed for 100G Ethernet, data center interconnect and 5G transport networks, the 100G CFP2 LR4 4x 25G NRZ 1310nm 10km LC Duplex Module, Cisco provides 112Gbps throughput in a CFP2 form factor. It operates at 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm over SMF through a Duplex LC connector and supports link lengths up to 10km. The module meets CFP2 MSA, IEEE 802.3ba 100GBASE-LR4 and includes digital diagnostic monitoring for live status readout.
Product Highlights
- CFP2 form factor, 112Gbps data rate
- Wavelength: 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm
- Connector: Duplex LC
- Reach: up to 10km
- Fiber media: SMF
- DDM/DOM: Supported
Specifications
| Part Number | CFP2-LR4-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | CFP2 |
| Max Data Rate | 112Gbps |
| Wavelength | 1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm |
| Max Cable Distance | 10km |
| Connector | Duplex LC |
| Media | SMF |
| Optical Components | 4x DFB |
| Extinction Ratio | >4dB |
| TX Power | -4.3~4.5dBm |
| RX Power | -10.6~4.5dBm |
| Typical Power Consumption | 6W |
| Core Size | 9/125 um |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 4x 25G-NRZ |
| Protocols | CFP2 MSA, IEEE 802.3ba 100GBASE-LR4 |
Applications
The 100G CFP2 LR4 4x 25G NRZ 1310nm 10km LC Duplex Module, Cisco is used in 100G Ethernet, data center interconnect and 5G transport networks, where it provides a 112Gbps link over SMF up to 10km. With its Duplex LC optical interface, the module works directly with the SMF infrastructure already installed in most facilities. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 4x 25G-NRZ modulation, which keeps it aligned with current 100G switch silicon.
Standards and Compatibility
Compliance: CFP2 MSA, IEEE 802.3ba 100GBASE-LR4. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is CFP2-LR4-100G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
