Customized MMC-16 Trunk Cable, 16-384 Fibers, OS2
For Tanzanian site work, correct product selection should be followed by careful transport, connector inspection and retention of the fiber records. The customized MMC-16 trunk is an OS2 backbone unit built around MMC connectors based on sixteen-fiber sub-units. Fiber capacity can scale from 16 to 384 fibers, with cable outside diameter from 4.0 to 17.5mm depending on the specified build. G.657.A1 glass, APC polish and an OFNP jacket incorporate the foundation for project-specific single-mode distribution.
Product Highlights
- MMC to MMC, 16-384 Fibers
- OS2 9/125μm, G.657.A1
- MMC insertion loss ≤0.35dB, return loss ≥60dB
- Trunk/ Extender Polarity wiring scheme
- 4.0-17.5mm Plenum (OFNP) cable
- Length and fiber count manufactured to the project requirement
Specifications
| Part Number | XXMMCSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC |
| Connector B | US Conec MMC |
| Polish Type | APC to APC |
| Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Fiber Count | 16-384 Fibers |
| Polarity | Trunk/ Extender Polarity |
| Cable Outside Diameter (OD) | 4.0-17.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 10mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 200-400N |
| Tensile Strength (Short Term) | 660-1320N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Engineering the fiber count and cable structure
A trunk cannot be regarded as merely a longer jumper. As fiber count increases, sub-unit arrangement, cable diameter, pulling strength and breakout protection become part of the design. This MMC-16 series supports trunk or extender polarity and 200–400N long-term tensile ratings, with 660–1320N short-term ratings across the build range. The precise values relevant to an order must be confirmed on its production diagram.
Backbone routes and panel coordination
Typical uses set out links between optical distribution frames, equipment rows and density-optimized MMC panels. Pre-termination allows multiple fibers to be installed in one pull and tested before arrival. The rack documentation should identify every sub-unit, connector polarity and gender transition so the installed trunk lands correctly. High fiber counts further require sufficient rear cable management and static bend space.
Specifying a made-to-project trunk
There is no assumed stock length for this customized product. Set out the path length in feet or meters, total fiber count, MMC connector gender, polarity, breakout lengths, jacket needs and labeling. Pulling eyes or other installation protection may generally be discussed where the pathway requires them. Length, diameter and tensile build are confirmed jointly rather than specified separately.
Ordering and Factory Support
Use XXMMCSMF as the MMC-16 trunk series reference and attach a fiber layout or diagram. A useful request includes connector gender, polarity, installation conditions, length, fiber count and sub-unit mapping, allowing the factory to quote the correct engineered unit. For Tanzanian deliveries, the order details should include any site identification needed by the installation team.
