Customized MPO-12 Armored Trunk Cable, 12-144F, OS2
This 12-144 Fibers (Base-12) MPO Female/Male trunk assembly is built for backbone cabling between racks, rows and distribution frames. OS2 9/125μm fiber, Plenum (OFNP)/LSZH jacket and factory installed pulling protection make it a one-pull replacement for hours of field termination work.
Available lengths are 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MPO Female/Male to MPO Female/Male, 12-144 Fibers (Base-12)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Type A/Type B/Type C polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 2m (7ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | AM-XXFMPOSMF |
|---|---|
| Manufacturer | HT |
| Connector A | MPO Female/Male |
| Connector B | MPO Female/Male |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to APC |
| Polarity | Type A/Type B/Type C |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Cable Structure | Double Jacket |
| Fiber Count | 12-144 Fibers (Base-12) |
| Trunk Outside Diameter (OD) | 4.5-14.2mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Breakout Length | 0.84m |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Long-term Tensile Load | 200N |
| Short-term Tensile Load | 660N |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
This trunk is designed for permanent backbone positions: between patch panels, from the core to aggregation rows, or between buildings on a campus. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. Every breakout leg is numbered, which simplifies documentation and troubleshooting.
Trunk Construction and Polarity
The assembly is engineered for one-pull installation: reinforced trunk body, protected breakout point and sequential leg labels. We can supply pulling socks, different breakout lengths and custom leg numbering to match your rack elevation drawings.
Ordering Information
To order, quote AM-XXFMPOSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.
Built to Your Spec
As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.
How We Pack
Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
