Customized MTP-16 Harness, 16F, OS2
This MTP® Elite Female/Male with Offset Key harness fans one multi-fiber connector out to duplex LC legs, replacing a cassette and patch cords with a single factory tested assembly. OS2 9/125μm fiber, 16 Fibers (Base-16), Plenum (OFNP)/LSZH jacket.
Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male with Offset Key to LC/SC/FC/ST, 16 Fibers (Base-16)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Straight Through/Crossover polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 16FMTPXXSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male with Offset Key |
| Connector B | LC/SC/FC/ST |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to UPC/APC |
| Polarity | Straight Through/Crossover |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Trunk Outside Diameter (OD) | 3.0mm |
| Breakout Outside Diameter (OD) | 2.0mm (Duplex), 2.0/0.9mm (Simplex) |
| Fiber Count | 16 Fibers (Base-16) |
| MTP Connector IL | ≤0.35dB |
| MTP Connector RL | ≥60dB |
| Standard Connectors IL | UPC≤0.2dB, APC≤0.3dB |
| Standard Connectors RL | UPC≥50dB, APC≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Install this harness between an MPO trunk or panel and LC based transceivers. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes. The labeled duplex legs make it easy to land each pair on the correct port.
LC Legs and Port Mapping
The harness replaces a cassette with a direct optical path from the MPO connector to each LC pair. This removes two mated connections from the channel, improving both loss budget and reliability. Custom leg lengths and labels are available on request.
Ordering Information
Please reference 16FMTPXXSMF in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
How We Pack
Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
Built to Your Spec
As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.
