Customized MTP Breakout Cable, 24F, OM4
Factory built Customized breakout assembly with 24 Fibers on fiber. The main trunk stays one cable until the fan-out point, which keeps pathways clear and makes moves and changes much easier to trace.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- Insertion loss ≤0.35/0.6dB (Elite/Standard), return loss ≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12)
- 3.0mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 24FMTPOM4 |
|---|---|
| Manufacturer | HT |
| Fiber Connector | US Conec MTP® |
| Connector Keyway | Up to Down |
| Fibre Mode | OM4 50/125μm |
| Gender | Female/Male |
| Fiber Count | 24 Fibers |
| Cable Outside Diameter (OD) | 3.0mm |
| Flame Rating | LSZH/Plenum (OFNP) |
| Test Wavelength | 850nm |
| Insertion Loss | ≤0.35/0.6dB (Elite/Standard) |
| Return Loss | ≥20dB (MTP-24), ≥27dB (MTP-8/MTP-12) |
Applications
Common applications include splitting an 800G or 400G parallel port into multiple lower rate links, connecting a spine switch to several leaf switches, and fanning a trunk out to transceivers without a cassette. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels.
Breakout Geometry and Wiring
Because the breakout is made in the factory, every leg has controlled length and identical optical performance. The mapping from trunk fibers to breakout connectors follows the specified polarity, and custom mappings are available for special transceiver combinations.
Ordering Information
Please reference 24FMTPOM4 in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
Logistics
Standard configurations normally ship within a few working days by DHL, UPS, FedEx, TNT or EMS. For project quantities we arrange air or sea freight, and we can ship on your own courier account or deliver to your appointed forwarder.
