MMC-12/24 Connector One-Push Fiber Optic Cleaner
For Tanzanian site work, correct product selection should be followed by careful transport, connector inspection and retention of the fiber records. This one-push cleaner is intended to serve MMC-12 and MMC-24 connector end faces, covering APC, PC and UPC polish types. The disposable push-style tool advances dry cleaning material with each operation and is rated for at least 525 uses. It supports routine ferrule servicing for multi-fiber panels, cable assemblies and test setups without liquid cleaner or replacement cartridges.
Product Highlights
- Cleaner Brand: US Conec IBC™
- Style: Push Style Port Cleaner
- Connector Type: MMC-12/24
- Polish Type: PC/UPC/APC
- Number of times: ≥ 525 times
- Use Type: Disposable
Specifications
| Part Number | 25802 |
|---|---|
| Manufacturer | HT |
| Cleaner Brand | US Conec IBC™ |
| Style | Push Style Port Cleaner |
| Connector Type | MMC-12/24 |
| Polish Type | PC/UPC/APC |
| Number of times | ≥ 525 times |
| Use Type | Disposable |
One tool for MMC-12 and MMC-24 interfaces
The push-style cleaner addresses the specified MMC-12/24 connector formats, not the MMC-16 model covered by the separate tool. Ensure the connector being used version before use, especially in a panel containing various MMC variants. Proper cleaning removes dust and light contamination that can raise insertion loss or damage ferrules when connectors are mated under pressure.
Cleaning before inspection and mating
Align the push-style cleaner squarely with the port or connector and complete one firm push cycle. Then examine the end face rather than assuming it is clean. If contamination remains, observe the equipment being used-compatible cleaning process and avoid improvising with unapproved swabs or solvents. Clean the mating connector as well, or debris can transfer back to the first ferrule.
Maintaining a reliable field tool
Keep the cap fitted during storage and replace the disposable unit after its rated uses. Never try to disassemble the advance mechanism or use the push-style tool on live optical interfaces. Installers should disable sources, examine with a suitable microscope and dust-cap clean connectors until they are ready to be mated.
Ordering and Factory Support
Use part number 25802 for the MMC-12/24 cleaner and set out number of units. If your toolkit further services MMC-16 connectors, set out the separate MMC-16 cleaner in the order and label the two tools for quick identification. For Tanzanian deliveries, the order details should include any site identification needed by the installation team.
