800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports with a cable length of 0.5~3m (2~10ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.
Product Highlights
- OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5~3m (2~10ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2OFLPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Cable Length | 0.5~3m (2~10ft) |
| Jacket Material | PET |
| Minimum Bend Radius | 58~72mm |
| Wire AWG | 26~30AWG |
| Max. Power Consumption | 0.1W (800G End) 0.1W (400G Per End) |
| Modulation Format | 8x 100G-PAM4 to Dual 4x 100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G/400G Ethernet |
| Protocols | OSFP MSA Rev5.0, IEEE 802.3ck, CMIS 4.0 |
Applications
Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Passive Copper Breakout DAC Cable carries 800Gbps between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) interfaces. This unit is supplied at 0.5~3m (2~10ft). One port becomes 2x OSFP (RHS/Flat Top), a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs 8x 100G-PAM4 to Dual 4x 100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Standards compliance covers OSFP MSA Rev5.0, IEEE 802.3ck, CMIS 4.0. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 0.5~3m (2~10ft) under part number OSFP-800G-2OFLPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG.
Packaging Options
Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
