800G OSFP Twin-port OSFP IHS/Finned Top to Twin-port OSFP RHS/Flat Top Active DAC Cable
The 800G OSFP Twin-port OSFP IHS/Finned Top to Twin-port OSFP RHS/Flat Top Active DAC Cable provides an 800Gbps (8x 106.25Gbps) copper connection between 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) ports with a cable length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for InfiniBand NDR fabrics, GPU clusters and AI training networks.
Product Highlights
- 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top)
- Data rate: 800Gbps (8x 106.25Gbps)
- Cable type: Active DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-OFLACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 48.5-59.5mm |
| Max. Power Consumption | 1.3W Per End |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 |
| Application | 800G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0 |
Applications
In InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP Twin-port OSFP IHS/Finned Top to Twin-port OSFP RHS/Flat Top Active DAC Cable provides a factory terminated 800Gbps (8x 106.25Gbps) link between 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) ports. This unit is supplied at 1-5m (3ft-16ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0. The unit works in any equipment with a standard 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG. Samples for testing can be arranged before bulk orders.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Package
Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
