1.6T OSFP224 DR8 FL Optical Transceiver
Designed for 1.6T Ethernet data centers, HPC and machine learning clusters, the 1.6T OSFP224 DR8 FL Optical Transceiver provides 1600Gbps throughput in a Twin-port OSFP RHS/Flat Top form factor. It operates at 1310nm over SMF through a Dual MTP/MPO-12 APC connector and supports link lengths up to 500m. The module meets OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3 and includes digital diagnostic monitoring for live status readout.
Product Highlights
- Twin-port OSFP RHS/Flat Top form factor, 1600Gbps data rate
- Wavelength: 1310nm
- Connector: Dual MTP/MPO-12 APC
- Reach: up to 500m
- Fiber media: SMF
Specifications
| Part Number | OSFP-DR8-1.6T-FL |
|---|---|
| Manufacturer | HT |
| Form Factor | Twin-port OSFP RHS/Flat Top |
| Max. Data Rate | 1600Gbps |
| Wavelength | 1310nm |
| Max. Cable Distance | 500m |
| Connector | Dual MTP/MPO-12 APC |
| Media | SMF |
| Transmitter Type | EML |
| Receiver Type | PIN |
| TX Power | -3.3~4dBm |
| Minimum Receiver Power | -6.3dBm |
| Power Budget | 3dB |
| Receiver Overload | 4dBm |
| Max. Power Consumption | 30W |
| Extinction Ratio | ≥3.5dB |
| Modulation (Electrical) | 8x 200G-PAM4 |
| Modulation (Optical) | Dual 4x 200G-PAM4 |
| Packaging Technology | COB (Chip on Board) Packaging |
| Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX & RX Built-in DSP |
| Inbuilt FEC | No |
| Protocols | OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3 |
Applications
Built for 1.6T Ethernet data centers, HPC and machine learning clusters, this Twin-port OSFP RHS/Flat Top module carries 1600Gbps over SMF up to 500m per link. The Dual MTP/MPO-12 APC interface and 1310nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing.
Standards and Compatibility
Compliance: OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is OSFP-DR8-1.6T-FL. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
