800G OSFP PLR8 B2 Optical Transceiver
Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP PLR8 B2 Optical Transceiver provides 850Gbps (8x 106.25Gbps) throughput in a Twin-port OSFP IHS/Finned Top form factor. It operates at 1310nm over SMF through a Dual MTP/MPO-12 APC connector and supports link lengths up to 10km. The module meets IEEE 802.3cu, IEEE P802.3ck, OSFP MSA and includes digital diagnostic monitoring for live status readout.
Product Highlights
- Twin-port OSFP IHS/Finned Top form factor, 850Gbps (8x 106.25Gbps) data rate
- Wavelength: 1310nm
- Connector: Dual MTP/MPO-12 APC
- Reach: up to 10km
- Fiber media: SMF
Specifications
| Part Number | OSFP800-PLR8-B2 |
|---|---|
| Manufacturer | HT |
| Form Factor | Twin-port OSFP IHS/Finned Top |
| Max Data Rate | 850Gbps (8x 106.25Gbps) |
| Wavelength | 1310nm |
| Max Cable Distance | 10km |
| Connector | Dual MTP/MPO-12 APC |
| Media | SMF |
| Transmitter Type | EML |
| Receiver Type | PIN |
| TX Power | -1.9~4.8dBm |
| Minimum Receiver Power | -8.2dBm |
| Power Budget | 6.3dB |
| Receiver Overload | 4.8dBm |
| Max Power Consumption | 16.5W |
| Extinction Ratio | >3.5dB |
| Modulation (Electrical) | 8x100G-PAM4 |
| Modulation (Optical) | Dual 4x100G-PAM4 |
| Packaging Technology | COB (Chip on Board) Packaging |
| Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX and RX Built-in DSP |
| Inbuilt FEC | No |
| Protocols | IEEE 802.3cu, IEEE P802.3ck, OSFP MSA |
Applications
Network architects choose the 800G OSFP PLR8 B2 Optical Transceiver for 800G Ethernet data center and cloud network environments: it runs 850Gbps (8x 106.25Gbps) over SMF and reaches 10km. The Dual MTP/MPO-12 APC interface and 1310nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
This product is designed and tested to comply with IEEE 802.3cu, IEEE P802.3ck, OSFP MSA. It plugs into any standards-based Twin-port OSFP IHS/Finned Top port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Order this product as OSFP800-PLR8-B2. Common models are stocked for fast dispatch. We can supply the module with neutral or customer-branded labels, and compatibility coding for a specific equipment vendor can be added at no extra process step.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
