200G QSFP-DD 8x 25G NRZ to 2x 100G QSFP28 4x 25G NRZ Breakout AOC, 5m
The 200G QSFP-DD 8x 25G NRZ to 2x 100G QSFP28 4x 25G NRZ Breakout AOC, 5m is an active optical cable assembly with QSFP-DD to 2x 100G QSFP28, carrying 200Gbps over OM3 at 850nm. Factory terminated and tested as a complete link, it offers a lighter and more flexible alternative to discrete transceivers with patch cords for 200G Ethernet data center and cloud network environments. You can order standard lengths from 1m (3ft) to 70m (230ft).
Product Highlights
- QSFP-DD to 2x 100G QSFP28
- Data rate: 200Gbps
- Cable type: OM3
- Length: 11 options from 1m (3ft) to 70m (230ft) as standard
- Wavelength: 850nm
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | QDD-200G-2Q4xNAO05 |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP-DD to 2x 100G QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft), 50m (164ft), 70m (230ft) |
| Cable Type | OM3 |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 4W (QSFP-DD End) 2.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| CDR (Clock and Data Recovery) | Not Supported |
| Modulation Format | NRZ |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP-DD MSA V5.0, QSFP28 MSA, CMIS V4.0, SFF-8636 |
Applications
The 200G QSFP-DD 8x 25G NRZ to 2x 100G QSFP28 4x 25G NRZ Breakout AOC, 5m is a 200Gbps active optical cable for QSFP-DD to 2x 100G QSFP28 connections in 200G Ethernet data center and cloud network environments. This unit is delivered in 11 standard lengths from 1m (3ft) to 70m (230ft). By fanning one port out to 2x 100G QSFP28, it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs NRZ modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
Standards compliance covers QSFP-DD MSA V5.0, QSFP28 MSA, CMIS V4.0, SFF-8636. The unit works in any equipment with a standard QSFP-DD to 2x 100G QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
The ordering part number is QDD-200G-2Q4XNAO. We make this cable in 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft), 50m (164ft) and 70m (230ft). Special lengths outside this range can be produced to order. Volume pricing is available for project quantities.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
