200G QSFP-DD to 2 x 100G QSFP28 Active Optical Breakout AOC
The 200G QSFP-DD to 2 x 100G QSFP28 Active Optical Breakout AOC is an active optical cable assembly with QSFP-DD to 2x100G QSFP28, carrying 200Gbps over OM3 at 850nm. Factory terminated and tested as a complete link, it offers a lighter and more flexible alternative to discrete transceivers with patch cords for 200G Ethernet data center and cloud network environments. Cable length: Customized.
Product Highlights
- QSFP-DD to 2x100G QSFP28
- Data rate: 200Gbps
- Cable type: OM3
- Length: Customized
- Wavelength: 850nm
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | QDD-200G-2Q4xNAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP-DD to 2x100G QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | Customized |
| Cable Type | OM3 |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 4W (QSFP-DD End) 2.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| CDR (Clock and Data Recovery) | Not Supported |
| Modulation Format | NRZ |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP-DD MSA V5.0, QSFP28 MSA, CMIS V4.0, SFF-8636 |
Applications
Designed for 200G Ethernet data center and cloud network environments, the 200G QSFP-DD to 2 x 100G QSFP28 Active Optical Breakout AOC carries 200Gbps between QSFP-DD to 2x100G QSFP28 interfaces. Ordered in customized lengths, it matches the actual rack geometry without slack. By fanning one port out to 2x100G QSFP28, it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs NRZ modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with QSFP-DD MSA V5.0, QSFP28 MSA, CMIS V4.0, SFF-8636. It plugs into any standards-based QSFP-DD to 2x100G QSFP28 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This cable is built to order in customized lengths. Our part number QDD-200G-2Q4xNAOxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Volume pricing is available for project quantities.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
