200G QSFP-DD to 2 x 100G QSFP28 Passive Copper Breakout DAC Cable
For short reach 200Gbps links in 200G Ethernet data center and cloud network environments, the 200G QSFP-DD to 2 x 100G QSFP28 Passive Copper Breakout DAC Cable offers a factory terminated passive breakout dac assembly with QSFP-DD to 2x QSFP28 connectors and a length of 0.5m (2ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. The cable meets QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636.
Product Highlights
- QSFP-DD to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5m (2ft)~3m (10ft)
- DDM/DOM: Not Supported
Specifications
| Part Number | QDD-200G-2Q4xNPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP-DD to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Minimum Bend Radius | 35mm |
| Wire AWG | 28~30AWG |
| Cable Length | 0.5m (2ft)~3m (10ft) |
| Jacket Material | PVC |
| Max. Power Consumption | 0.1W (QSFP-DD End) 0.1W (QSFP28 Per End) |
| Modulation Format | QSFP-DD-8x 25G-NRZ QSFP28-4x 25G-NRZ |
| DDM/DOM | Not Supported |
| Protocols | QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636 |
Applications
In 200G Ethernet data center and cloud network environments, the 200G QSFP-DD to 2 x 100G QSFP28 Passive Copper Breakout DAC Cable provides a factory terminated 200Gbps link between QSFP-DD to 2x QSFP28 ports. This unit is supplied at 0.5m (2ft)~3m (10ft). The breakout design lets one high speed port feed 2x QSFP28, which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Standards compliance covers QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636. The unit works in any equipment with a standard QSFP-DD to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 0.5m (2ft)~3m (10ft) under part number QDD-200G-2Q4xNPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG. Volume pricing is available for project quantities.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
