5m (16ft) Juniper Networks QDD-400G-AC05 Compatible 400G QSFP-DD 8 x 50G PAM4 Active Copper Twinax Cable
The QDD-400G-AC05 compatible ACC cable provides 400G connectivity for Juniper Networks equipment over a fixed 5m (16ft) assembly. Both ends use the stated QSFP-DD arrangement. It is inspected and functionally checked before packing, with handling guidance designed to protect the connectors during installation and later service.
OEM Part Number: QDD-400G-AC05HT Part Number: QDD-400G-AC
Product Highlights
- 400G ACC direct-attach assembly
- Exact cable length: 5m (16ft)
- QSFP-DD interface configuration
- Copper cable media
- Prepared for hosts requiring Juniper Networks QDD-400G-AC05
Specifications
| Part Number | QDD-400G-AC05 |
|---|---|
| Form Factor | QSFP-DD |
| Max. Data Rate | 425Gbps |
| Media | Copper |
| Cable Type | Active Twinax |
| Cable Length | 5m (16ft) |
| Wire AWG | 28AWG |
| Minimum Bend Radius | 80mm |
| Max. Power Consumption | 2.5W Per End |
| Jacket Material | PVC |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP-DD MSA, SFF-8636 |
| OEM Part Number | QDD-400G-AC05 |
| Host Compatibility | Juniper Networks |
| Manufacturer | HT |
Exact Length and Product Identity
This product page covers QDD-400G-AC05 in 5m (16ft). The OEM reference, physical length and HT factory configuration should remain together on the purchase order and receiving record. Other reaches or compatibility identities must be selected and verified separately rather than assumed to be interchangeable.
Cable Construction and Installation Planning
This 5m (16ft) active copper assembly connects compatible QSFP-DD ports without separate optical modules. Confirm the aggregate rate, lane configuration and host operating mode before installation. Support the complete twinax run, preserve connector access and do not crease the cable or force it into a tight service loop.
Field Installation and Maintenance
Inspect the route and both connectors before installation, then support the cable without pulling on either connector housing. During maintenance, release the latch properly rather than using the cable as a handle. Keep protection on unused ends, and if the assembly is removed for later use, coil it loosely and record its part number so the same length can be returned to service.
Juniper Networks Compatibility and Factory Testing
A field-ready cable needs both correct identification and a stable operating link. Our pre-packing check therefore includes the connectors, host recognition and link behavior. For equipment with uncertain revision history, providing the host model and software release helps identify compatibility requirements before the assembly reaches the installation site. Factory acceptance covers both connector housings, host identification, live-link stability and diagnostic indications where the platform exposes them. The assembly is checked as the exact active copper configuration and length listed here.
Ordering Information
Request the cable by its exact part number and length, and state the equipment model if compatibility confirmation is needed. Site orders can list quantities by rack or installation team. Any requested label should retain the part number so a removed or spare cable can still be identified accurately. This page describes QDD-400G-AC05 in 5m (16ft); quote this exact reference and length together with quantity and the intended host platform.
Quality Assurance and Packaging
The cable and both connectors are inspected before a functional link test. Connector protection and bend-safe packing reduce handling damage during transport and storage. Customer or site labels can be added for field inventories, with different lengths separated to simplify issue and return of spare assemblies.
Shipping and Lead Time
Available stock is generally dispatched within one to three working days after order confirmation, with production lead times advised for larger quantities. Delivery can be arranged by courier, air freight or sea freight, and goods may instead be handed to an appointed forwarder or shipped on the customer’s courier account.
