Tanzania Fiber Optics

fiber optic products manufacturing since 1995

400G QSFP-DD QDD ZR Optical Transceiver

400G QSFP-DD QDD ZR Optical Transceiver

The 400G QSFP-DD QDD ZR Optical Transceiver is a hot-pluggable QSFP-DD transceiver rated at 400Gbps. Using a Duplex LC/UPC optical interface over SMF at its rated wavelength, it covers transmission distances up to Amplified: ≤120km Unamplified: ≤40km. Compliance with OIF 400ZR, OIF-CMIS-05.2, OIF-C-CMIS-01.2, QSFP-DD-Hardware-Rev6.3, IEEE Std 802.3-2018, together with integrated diagnostic monitoring, makes it a dependable choice for data center interconnect, metro transport and carrier aggregation networks.

Product Highlights

  • QSFP-DD form factor, 400Gbps data rate
  • Connector: Duplex LC/UPC
  • Reach: up to Amplified: ≤120km Unamplified: ≤40km
  • Fiber media: SMF
  • DDM/DOM: Supported
  • Operating temperature: 0°C to 70°C(32 to 158°F)

Specifications

Juniper CompatibleQDD-400G-ZR
ManufacturerHT
Form FactorQSFP-DD
Max. Data Rate400Gbps
Max. Cable DistanceAmplified: ≤120km Unamplified: ≤40km
ConnectorDuplex LC/UPC
MediaSMF
CD Robustness2400(ps/nm)
DDM/DOMSupported
TX Power-13~-9dBm
RX PowerAmplified: Full Rx OSNR tolerance: -12~0dBm Extended range: -15~1dBm Unamplified: -20~0dBm
Max. Power Consumption18.5W
Minimum Receiver PowerAmplified: -12dBm Unamplified: ≤-20dBm
OSNR Tolerance26dB/0.1nm
Commercial Temperature Range0°C to 70°C(32 to 158°F)
Inbuilt FECCFEC
Modulation FormatDP-16QAM
ProtocolsOIF 400ZR, OIF-CMIS-05.2, OIF-C-CMIS-01.2, QSFP-DD-Hardware-Rev6.3, IEEE Std 802.3-2018
ApplicationEdge DCI

Applications

Network architects choose the 400G QSFP-DD QDD ZR Optical Transceiver for data center interconnect, metro transport and carrier aggregation networks: it runs 400Gbps over SMF and reaches Amplified: ≤120km Unamplified: ≤40km. The Duplex LC/UPC interface and 850nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. For networks standardized on Juniper hardware, it is a drop-in equivalent of the QDD-400G-ZR. The link runs DP-16QAM modulation, which keeps it aligned with current 400G switch silicon.

Standards and Compatibility

This product is designed and tested to comply with OIF 400ZR, OIF-CMIS-05.2, OIF-C-CMIS-01.2, QSFP-DD-Hardware-Rev6.3, IEEE Std 802.3-2018. It is interoperable with Juniper equipment and serves as a direct equivalent to the Juniper part number QDD-400G-ZR.

Ordering Information

Our part number for this module is QDD-ZR-400G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.

Quality Assurance

Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.

Packaging

Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.

OEM and Custom Orders

We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.

Delivery

Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.

You are here: Home 100BASE SFP 400G QSFP-DD QDD ZR Optical Transceiver

Tanzania Fiber Optics

China factory:ZYT Industrial Area,Shenzhen.
Tanzania Office:Ilala,Lumumba Str,
Dar es Salaam
Email:This email address is being protected from spambots. You need JavaScript enabled to view it.

Documentation

For products catalogue/data sheets or any general inquiry, please email info@huihongfiber.com and we will reply with details.

support