200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC
The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC connects QSFP56 to 2x QSFP28 ports at 200Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 200G Ethernet, data center interconnect and 5G transport networks. Cable length: Customized.
Product Highlights
- QSFP56 to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Breakout AOC
- Length: Customized
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-2Q4xNAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | Customized |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 5.5W (QSFP56 End) 5.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| Modulation (Electrical) | QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ |
| Modulation (Optical) | QSFP56-4x 50G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | Yes |
| Protocols | IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636 |
Applications
Designed for 200G Ethernet, data center interconnect and 5G transport networks, the 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC carries 200Gbps between QSFP56 to 2x QSFP28 interfaces. Ordered in customized lengths, it matches the actual rack geometry without slack. One port becomes 2x QSFP28, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
Compliance: IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2Q4xNAOxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements. Samples for testing can be arranged before bulk orders.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Reliability Control
From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.
