100G QSFP28 SWDM4 4x 25G NRZ 850/880/910/940nm 100m Duplex LC/UPC Module, Cisco
Designed for 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 SWDM4 4x 25G NRZ 850/880/910/940nm 100m Duplex LC/UPC Module, Cisco provides 103.1Gbps throughput in a QSFP28 form factor. It operates at 850/880/910/940nm over MMF through a Duplex LC/UPC connector and supports link lengths up to 75m@OM3/100m@OM4/150m@OM5. The module meets QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 and includes digital diagnostic monitoring for live status readout.
Product Highlights
- QSFP28 form factor, 103.1Gbps data rate
- Wavelength: 850/880/910/940nm
- Connector: Duplex LC/UPC
- Reach: up to 75m@OM3/100m@OM4/150m@OM5
- Fiber media: MMF
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-BIDI-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max. Data Rate | 103.1Gbps |
| Wavelength | 850/880/910/940nm |
| Max. Cable Distance | 75m@OM3/100m@OM4/150m@OM5 |
| Connector | Duplex LC/UPC |
| Media | MMF |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| TX Power | -5.5~3dBm |
| Minimum Receiver Power | -9.5dBm |
| Power Budget | 4dB |
| Receiver Overload | 3.4dBm |
| Max. Power Consumption | 3.5W |
| Extinction Ratio | >2dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 4x 25G-NRZ |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Packaging Technology | COB Packaging |
| Bit Error Ratio (BER) | 5E-5 |
| MTBF | 11,100,000 Hours (@40°C, 60% CL) |
| Protocols | QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 |
Applications
In 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 SWDM4 4x 25G NRZ 850/880/910/940nm 100m Duplex LC/UPC Module, Cisco delivers 103.1Gbps transmission over MMF with a reach of 75m@OM3/100m@OM4/150m@OM5. The Duplex LC/UPC interface and 850/880/910/940nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4. The unit works in any equipment with a standard QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
Our part number for this module is QSFP-BIDI-100G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
