Customized MTP-12 Trunk Cable, 12-576F, OS2
This 12-576 Fibers (Base-12) MTP® Elite Female/Male trunk assembly is built for backbone cabling between racks, rows and distribution frames. OS2 9/125μm fiber, Plenum (OFNP)/LSZH jacket and factory installed pulling protection make it a one-pull replacement for hours of field termination work.
Available lengths are 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male to MTP® Elite Female/Male, 12-576 Fibers (Base-12)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥65dB
- Type A/Type B/Type C polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 2m (7ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMTPSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | US Conec MTP® Elite Female/Male |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to APC |
| Polarity | Type A/Type B/Type C |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Cable Structure | Double Jacket |
| Fiber Count | 12-576 Fibers (Base-12) |
| Trunk Outside Diameter (OD) | 3.6-21mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Breakout Length | 0.84m |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥65dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Long-term Tensile Load | 100-200N |
| Short-term Tensile Load | 300-660N |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Backbone cabling is where mistakes cost the most, so this trunk is built and verified entirely in the factory. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. It arrives with test results, labeled legs and the correct polarity for your panel layout.
Trunk Construction and Polarity
The trunk uses a double jacket design: a rugged outer sheath protects the whole bundle, while each breakout leg keeps its own jacket and numbering. Base-8 and Base-12 constructions are available depending on the fiber count. Polarity follows the Type shown in the table, and pulling eyes or mesh grips can be fitted for installation.
Ordering Information
Please reference XXMTPSMF in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
